Standards for automotive cables
DIN EN 13602 : Soft Annealed Electrolytic Cu - ETP1
DIN 72551, ISO 6722-1 : Bare or Tinned Conductor Construction & Insulation
| Cable Types | ||
|---|---|---|
| FLRY- A (T1) – thin wall PVC Insulation | -40°C to +85°C (3000 hrs) | |
| FLRY- B (T2) – thin wall PVC Insulation | -40°C to +105°C (3000 hrs) | |
| FLRY- C (T3) – PVC / TPE / XLPO Insulation | -40°C to +125°C (3000 hrs) | |
| FLRY- D (T4) – XLPO / TPEE Insulation | -40°C to +150°C (3000 hrs) | |
| FLRY- E (T5) – SILICON Insulation | -40°C to +175°C (3000 hrs) | |
| FLRY- F (T6) – Fluoropolymer Insulation (Extruded / Sintered) | -40°C to +200°C (3000 hrs) | |
| FLY – PVC Insulation | -40°C to +105°C (3000 hrs) | |
| FLYW – PVC Insulation – Hot Pressure Resistant | -40°C to +125°C (3000 hrs) | |
| FLYK – PVC Insulation – Cold Resistant & Increased Flexibility | -50°C to +105°C (3000 hrs) | |
| FLRYK – thin wall PVC Insulation – Cold Resistant | -50°C to +105°C (3000 hrs) | |
| FLRYW- TYPE A – thin wall PVC Insulation – Hot Pressure Resistant | -40°C to +125°C (3000 hrs) | |
| FLRYW- TYPE B – thin wall PVC Insulation – Hot Pressure Resistant | -40°C to +125°C (3000 hrs) | |
| FLR4Y- TYPE A – Polyamide Insulation | -40°C to +105°C (3000 hrs) | |
| FLR4Y- TYPE B – Polyamide Insulation | -40°C to +105°C (3000 hrs) | |
| FLRYH – thin wall PVC Insulation – Highly Flexible Fine Wire | -40°C to +105°C (3000 hrs) | |
| FL11Y – TPE-U Insulation for Battery Cables | -40°C to +110°C (3000 hrs) | |
| FLYY – PVC Insulation & Sheath | -40°C to +110°C (3000 hrs) | |
| Abbreviations | ||
|---|---|---|
| FL | Automotive Cable Low Voltage | |
| R | Reduced Insulation Wall Thickness | |
| S | Thin Wall Type | |
| Y | PVC Insulation | |
| YW | Heat & Hot Pressure Resistant PVC | |
| TYPE A | Symmetrical (FLRYW - A & FLR4Y-A) | |
| YK | Cold Resistant PVC | |
| YH | PVC & Highly Flexible | |
| 11Y | TPE-U Insulation | |
| 4Y | TPE-U Insulation | |
| TYPE B | Unsymmetrical (FLRYW -B & FLR4Y-B) | |